SCFPL03-0-0

Radisys
Radisys Logo

MicroATX/FlexATX Intel 815E PCI Motherboard, SC815E ATX with integrated DVI, RoHS

  • New or Fully Refurbished
  • Test Report
    Included
  • 1-Year
    Warranty

Details

Name Value
Product SCFPL03-0-0
Make Radisys
Base SC815E
Type Single Board Computer
Lead Time Request Quote for Lead Time
Quantity in Stock Request Quote for Quantity in Stock

Specs

Name Value
AGP 4X AGP slot
Audio AC97 v2.1 CODEC
BIOS PhoenixBIOS 4.0 Release 6.0
Board Type Flex-ATX
Compliance MicroATX and FlexATX compliant
Floppy Supports standard 2- and 3-mode 3.5" floppy drive
IDE Two Ultra ATA/100 or ATA/66 interfaces via 40-way boxed header Supports ATAPI, LS120 and ZIP drives
ISA Connector for PCI/ISA bridge support via PCI slot
Network Intel ICH2 integrated MAC with Intel 82562 PHY IEEE 802.3 10Base-T and 100Base-TX compatible
PCI Three dedicated bus master PCI 2.2 slots
Processor 370-pin PGA ZIF for Intel Celeron and Pentium III processors in FC-PGA package 66MHz, 100MHz, 133MHz operation
Intel Pentium III
System Memory Two 168-pin DIMM sockets for PC100 and PC133 SDRAM Maximum of 512MB
Video 3D graphics controller integrated in 815E chipset
System Chipset Intel 815
Form Factor Standard AT
Ethernet Chipset Intel 82562
Video Chipset Intel 815E

Features

  • 4X AGP slot
  • 9" x 7.5"
  • AC97 audio
  • Connectors for internal cabling
  • DFP and DVI monitor support
  • Eight GPIO lines
  • Fan control
  • Four USB ports
  • Integrated VGA
  • Intel 10/100 Ethernet
  • Intel 815E chipset
  • MicroATX and FlexATX compliant
  • One parallel port
  • PanelLinkTM flat panel interface
  • Phoenix BIOSTM
  • ROHS Compliant
  • Three PCI slots
  • Two serial ports
  • Up to 512MB SDRAM

Datasheet

application/pdf

Filename:

RADISYS-SC815E-datasheet.pdf

Size:

108 KiB

Extracted Text

ENDURA SC815E
MicroATX/FlexATX Intel® 815E PCI Motherboard
FEATURE SUMMARY
Intel 815E chipset
Integrated VGA
FC-PGA Celeron processor in
flip-chip pin grid array
(FC-PGA) package
FC-PGA Pentium III
processor in FC-PGA
package
Up to 512MB SDRAM
System management
Intel 10/100 Ethernet
PanelLinkTM flat panel
interface
DFP and DVI monitor support
AC97 audio
Fan control
Eight GPIO lines
Three PCI slots
4X AGP slot
One parallel port
Two serial ports
Four USB ports
Phoenix BIOSTM
Connectors for internal
cabling
9" x 7.5"
MicroATX and FlexATX
compliant
ROHS Compliant
Endura motherboards are Intel® architecture motherboards designed specifically to meet the demands of the
OEM embedded marketplace. Based on chipsets supplied by the Embedded Intel Architecture Division, Endura
motherboards have an extended lifetime, unlike commercial motherboards which have typical lifetimes of six to
twelve months. Combined with high quality design and manufacture, engineering change control, engineering
support and product life cycle management, Endura motherboards provide the ideal solution for an embedded
system where long lifetime and low cost of ownership are paramount. Endura motherboards also offer continued
support for legacy features such as standard serial interfaces and hard-switched power supplies, which remain
important for embedded applications.
The SC815E is a small form factor, MicroATX motherboard that is well suited to embedded applications. The
dimensions of the board are small enough such that the SC815E can also be used in a FlexATX chassis. It is
therefore a very versatile motherboard suitable for a wide variety of applications. It is available with either
CeleronTM or Pentium® III processors in FC-PGA package providing scalable performance and the option to
choose the appropriate price/performance point to suit the application. The high degree of integration and rich
feature set provides a platform that is ideal for low cost system design. The SC815E is designed for use in
applications with a need for high performance graphics, which can be supported either with the integrated 815E
video or by upgrading to a high performance AGP graphics card in the 4X AGP slot. Available in different build
configurations, the SC815E is used in telecom, datacom, medical, transaction terminals (such as coin-op gaming)
and industrial automation applications.
ENDURA SC815E DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 1 of 3
Endura SC815E Specifications

FEATURE FUNCTION DESCRIPTION
Processor Socket
FSB
370-pin PGA ZIF for Intel Celeron and Pentium III processors in FC-PGA package
66MHz, 100MHz, 133MHz operation
Chipset Intel 815E chipset with ICH2
Memory Type
Capacity
ECC/Parity
Two 168-pin DIMM sockets for PC100 and PC133 SDRAM
Maximum of 512MB
Not supported
Video Controller
Display Cache
Frame Buffer
Flat Panel
DFP/DVI
3D graphics controller integrated in 815E chipset
Optional display cache via GPA module in the AGP slot
Stored in main memory (holds 2D and 3D data)
Silicon Image SII164 PanelLink controller
Cabled DVI or DFP connector from header
Optional DVI or DFP adapter for rear I/O mounting
Audio Controller
Connectors
AC97 v2.1 CODEC using Analog Devices AD1885 (with integrated headphone amplifier)
ATAPI connector for CD-ROM (stereo)
ATAPI connector for telephony (mono)
7-pin connector for external AC97 CODEC
Stereo line out 3.5mm jack socket (can be used with headphones)
Stereo line in 3.5mm jack socket
Mono microphone 3.5mm jack socket with phantom power, suitable for electret microphones
Network Controller
Connector
Intel ICH2 integrated MAC with Intel 82562 PHY
IEEE 802.3 10Base-T and 100Base-TX compatible
RJ45 with LEDs for line activity, link integrity and line speed
IDE Devices
Types
Two Ultra ATA/100 or ATA/66 interfaces via 40-way boxed header
Supports ATAPI, LS120 and ZIP drives
Floppy Types Supports standard 2- and 3-mode 3.5" floppy drive
Mechanical Dimensions
Compliance
PCB
I/O shield
9" x 7.5"
MicroATX and FlexATX compliant
Four layers
Standard ATX available options for RJ45 Ethernet and DVI/DFP connectors
I/O Parallel Port
Serial Ports
IrDA
USB
Keyboard & Mouse
GPIO
25-pin D-type supporting bi-directional, EPP and ECP modes
COM1 on 9-pin D-type, COM2 via 10-way header
Supported in place of COM2 via front panel connector
Dual stacked USB 1.1 rear connector
Motherboard header for single USB port
USB interface via AGP slot
Swappable PS/2 connectors
Phoenix keyboard code
Motherboard headers for keyboard and mouse ports
Eight GPIO lines for control functions or front panel indicators
Expansion Slots PCI
ISA
AGP
Three dedicated bus master PCI 2.2 slots
Connector for PCI/ISA bridge support via PCI slot
4X AGP slot
System Management Monitoring of voltage, temperature and fans
Anti-tamper security
CPU fansink and system fan speed control
Power Management PCI PME, ACPI 1.0, APM 1.2
Power Supply Type
Typical
Support for hard- and soft- switched PSU
35W
Battery Lithium coin cell (5 years operating life typical)
Optional super-cap for 1 hour backup
BIOS Type
Special Features
PhoenixBIOS 4.0 Release 6.0
Customizable defaults, customer logo, silent boot, automatic configuration
Operating Systems Windows® 95, Windows 98, Windows 2000, Windows NT® Qualification of real time and other operating systems subject to demand
Safety Compliance Designed for compliance with UL1950, EN60950 and IEC60950
EMC Compliance Designed for compliance with EN55022, EN55024 and FCC Part 15 Class B
Environment Operating Temp
Storage Temp
Relative Humidity
0°C to 55°C
-40°C to 85°C
5% to 95% non-condensing
ENDURA SC815E DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 2 of 3
Ordering Information
Toll-Free: 800-950-0044
Phone: 503-615-1100
Support: 866-385-6167
Call for pricing and availability.
Refer to the order codes below.
DESCRIPTION
SC815E uATX without integrated DVI, RoHS
PRODUCT CODE: SCL03-0-0
SC815E ATX with integrated DVI, RoHS
PRODUCT CODE: SCFPL03-0-0
I/O shield for SCL03-0-0, RoHS
PRODUCT CODE: ATX-L 81X IOSHLD
I/O shield for SCFPL03-0-0, RoHS
PRODUCT CODE: ATX-FPL 81XIOSHLD
DVI connector / bracket assembly, RoHS
PRODUCT CODE: DVI_CABLE-R
Contact Information
www.radisys.com
info@radisys.com
Channels and other locations
Corporate Headquarters
5445 NE Dawson Creek Dr.
Hillsboro, OR 97124 USA
Phone: 503-615-1100
Fax: 503-615-1121
Toll-Free: 800-950-0044
Support: 866-385-6167
EMEA: +49 811 555457-0
China: 86.21.50804062
2006 RadiSys Corporation. RadiSys is a registered trademark of RadiSys Corporation. Convedia, Microware and
OS-9 are registered trademarks of RadiSys Corporation. Promentum, and Procelerant are trademarks of
RadiSys Corporation. *All other trademarks are the properties of their respective owners. All specifications within
this document are subject to change without notice.
ENDURA SC815E DATA SHEET | © 2006 RadiSys Corporation | ID: 12-12-2006 3 | Page 3 of 3

Manual

No manual found...

FAQs

Is the SCFPL03-0-0 readily available?

GID Industrial specializes in obtaining products that are difficult to find. The manufacturing of the SCFPL03-0-0 has ceased, and the supply is scarce. Lead times may vary, but on average, 5 - 7 business days is the standard delivery time.

What does the SCFPL03-0-0 typically cost?

Our pricing is based on several factors including availability and delivery requirements. GID Industrial offers highly-competitive pricing as well as superb customer service. Please feel free to contact us to receive a quote for the SCFPL03-0-0.

Do you offer warranties and refunds?

Every product purchased from GID Industrial is covered by a 30-day warranty and refund policy, ensuring that we will replace, repair, or refund any order within those days. This can be prolonged with the purchase of an extended warranty, providing comprehensive coverage throughout the warranty date.

Will you work with international companies?

Yes! At GID Industrial, our customer base is global! With a few exceptions, we can and will ship our products anywhere in the world!

What payment methods are accepted for the SCFPL03-0-0?

GID Industrial accepts wire transfers, major credit cards, and company checks. We will also work under the direction of the customer with their escrow company.

What carriers do you typically work with?

We work with all major carriers including FedEx, UPS, DHL, and the USPS. We can also work with other shipping carriers if this is a requirement for our customer.

Are repair services available from GID Industrial?

GID Industrial does provide repair services for the SCFPL03-0-0. Our experienced team of engineers is available on hand to examine, diagnose, and repair the product efficiently and within a timely manner. Contact us today to discuss our repair service.

Does GID Industrial test the SCFPL03-0-0 before shipping?

Of course! GID Industrial is able to fully test obsolete products. We can provide a reliable diagnosis and include a test report with most of the orders shipped.

Regarding the lifecycle of SCFPL03-0-0: can GID help me?

You bet! Managing lifecycles of industrial equipment is a specialty of GID Industrial. We collect data to track the life cycle of products both hard to find and actively in production. This process enables us to phase out parts that are obsolete promptly and phase in the new generation of products.

Do you provide assistance in moving large quantities of obsolete inventory?

We often work with companies to assist with moving and migrating excess parts and inventory. Often, companies sell off end-of-life product for just its scrap value. Instead, we work to obtain top market value for companies looking to dispose of their excess industrial parts and equipment. GID Industrial has worked with not only the SCFPL03-0-0 but also a wide variety of products.

Call for Price and Availability

+1-888-443-4456
local: +1-469-283-2440

or

Spinner